Kontron AT8404 - Manual (Page 101)

Software Description
88 AT8404 User Guide
www.kontron.com
-------------------------------------------------------------------------------
|ID | Name | Versions | Upload Progress | Upload| Image |
| | | Active| Backup| File |0% 50% 100%| Time | Size |
|---|-----------|-------|-------|-------||----+----+----+----||-------|-------|
| 1 |IPMC | 5.24 | 5.24 | 5.24 ||...................Performing activation
stage:
|| 01.26 | 354e5 |
-------------------------------------------------------------------------------
Waiting firmware activation...OK
Firmware upgrade procedure successful
Successfully transferred IPMI firmware image tftp://10.0.111.1/t5307-ipmi-GA-
2.04.hpm
(Ethernet Fabric) #
4.4.2.1 Updating IPMI FW of an AMC
There is also a possibility to update the IPMI FW of any AMC plugged into an AMC slots. Pre-requisite is an
HPM.1 compatible format of the IPMI FW update image.
To do the update use the CLI command (example updating AMC FW plugged into slot B1):
(Ethernet Fabric) #download amcipmifw tftp://192.168.50.5/ipmi.hpm amcb1
Flashing a new IPMI firmware will disable the IPMI Controller for some minutes.
Are you sure to update the IPMI firmware? (y/n)y
...
(Ethernet Fabric) #
4.4.3 Updating PLD
Note...
PLD (FPGA) updates should be treated very carefully. Please refer to Software
Release Notes about information, whether a PLD update is required at all.
Note...
To update from GA 2.03 or earlier to GA 2.04 or later, please install first new sys-
tem firmware, since the PLD package format and thus update procedure has
changed.