Kontron AT8404 - Manual (Page 34)

Hardware Description
21 AT8404 User Guide
www.kontron.com
3.1.2 Unit Computer and Memory
A PowerPC PPC405GPr-400MHz 32 bit RISC processor with 16KB D-cache, 256MB SDRAM and 128MB Flash
memory manages the Ethernet switch via 32bit / 66MHZ PCI local bus. The CPU is accessible via serial port or
10/100BASE-T Ethernet from the RTM or in-band via the GbE switch.
Besides the direct PCI connection to the management interface of the switch, a PCI Ethernet controller links
the Unit Computer to a switch port which is configured as 10/100BaseTX.
3.1.2.1 Fast Ethernet Management Interface
The 10/100BaseTX Ethernet management interface connects the Unit Computer to the RTM. It uses the follow-
ing pins of the ATCA Zone 3 connector:
3.1.2.2 RS232 Management Interface
One RS232 interface of the Unit Computer is the serial port which is routed to a miniature connector on the
front plate. An adapter cable is available from Kontron to establish a connection with a terminal with a stan-
dard DB9 serial port. Additionally, the Unit Computer’s serial port is routed to the Zone 3 connector so that a
connection can also be established by using an appropriate RTM like the RTM8030. If both ports are connected
to a terminal, the front plate connection takes precedence over the RTM connection.
0/21 1 GbE 100BaseTX Unit Computer
0/22 1 GbE Serdes RTM SFP
0/23 1 GbE 1000BaseT Base Channel 1
0/24 1 GbE 1000BaseT Base Channel 2
0/25 10 GbE XAUI Fabric Channel 1
0/26 10 GbE XAUI Fabric Channel 2
Table 3-2: Fast Ethernet Pins on RTM Connector
J30 Pin Function
B8 MNG_LAN_DA-
A8 MNG_LAN_DA+
D8 MNG_LAN_DB-
C8 MNG_LAN_DB+
Table 3-1: GbE Switch Port Assignment (Continued)
CLI ID Speed Type Connection