12 cmdgetstorageportselection, 13 cmdsetstorageportselection – Kontron AT8404 User Manual
Page 92
Software Description
79
AT8404 User Guide
www.kontron.com
4.3.2.12
CmdGetStoragePortSelection
This command reads the current setting of the storage switch between AMC B4 and AMC B1/AMC B3.
4.3.2.13
CmdSetStoragePortSelection
Command Name
NetFn
LUN
Command Number
CmdGetStoragePortSelection
0x30
3
0x91
Byte Num
Data Field
Request Data
1...5
Token:
0xAB - (~T)
0xCA - (~5)
0xCC - (~3)
0xCF - (~0)
0xC8 - (~7)
6
Device:
0 – switch located at AMC B4
Response Data
1
Completion Code
2
Setting:
0 - the AMC B4 (port 2) is connected to AMC B1 (port 3)
1 - the AMC B4 (port 2) is connected to AMC B2 (port 2)
Command Name
NetFn
LUN
Command Number
CmdSetStoragePortSelection
0x30
3
0x92
Byte Num
Data Field
Request Data
1...5
Token:
0xAB - (~T)
0xCA - (~5)
0xCC - (~3)
0xCF - (~0)
0xC8 - (~7)
6
Device:
0 - switch located at AMC B4
7
Setting:
0 - the AMC B4 (port 2) is connected to AMC B1 (port 3)
1 - the AMC B4 (port 2) is connected to AMC B2 (port 2)
Response Data
1
Completion Code