Kontron AT8404 User Manual
Page 102
Software Description
89
AT8404 User Guide
www.kontron.com
The onboard FPGA can be updated using the 'copy' command from the Fastpath CLI:
(Ethernet Fabric) #copy tftp://<ip_addr>/t5307-pld-update-GA-2.04.pkg image2
Mode........................................... TFTP
Set Server IP.................................. 192.168.50.5
Path........................................... ./
Filename....................................... t5307-pld-update-GA-2.04.pkg
Data Type...................................... Code
Destination Filename........................... image2
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
Write image to flash starting...
File transfer operation completed successfully.
(Ethernet Fabric) #
Note...
The new FPGA code will be used after the next power-cycle of the complete
board. This means that the board must be removed and re-inserted from its slot.