Kontron KTGM45-mITX - Manual (Page 11)

KTGM45 Users Guide
KTD-N0793-O Page 11
2 System specification
2.1 Component main data
The table below summarizes the features of the KTGM45/mITX and KTGM45/Flex embedded motherboards.
Form factor KTGM45/mITX: miniITX (170,18 mm by 170,18 mm)
KTGM45/Flex: Flex-ATX (190,5 mm by 228,6 mm)
KTGM45/ATXE: ATX (190,5 mm by 304,0 mm)
Processor Support the following Penryn and Meron CPU’s via mPGA479 or mPGA478 ZIF Socket
• Intel® Core™ 2 Extreme Mobile Processor (Penryn)
• Intel® Core™2 Quad Mobile processor (Penryn) Q9100
• Intel® Core™2 Duo Mobile processor (Penryn)
• Intel® Celeron® (Meron)
Up to 1066MHz system bus and 1/3/6/12MB internal cache.
Memory • 2 pcs DDR3 DIMM 240pin DRAM sockets
• Dual channel interleaved mode support
• Support for DDR3 800/1066MHz (PC3-6400/PC3-8500)
• Support system memory from 512MB and up to 2x 4GB.
Note: Less than 4GB displayed in System Properties using 32bit OS
(Shared Video Memory/PCI resources is subtracted)
• ECC not supported
Chipset Intel GM45+ICH9ME Chipset consisting of:
• Intel® 82GM45 Graphics Memory Controller Hub (GMCH)
• Intel® ICH9ME I/O Controller Hub
RTC • RTC (Real Time Clock) HP (High Precision) (not available on KTGM45/mITX
Std/Basic). Precision is +/-10 sec/month in the temperature range 0 – 60ºC.
Security • Intel® Integrated TPM 1.2 support
Management • Intel® Active Management Technology (Intel® AMT) 4.0
Video
Intel Gen 5.0 integrated graphics engine (Intel® GMA 4500MHD)
• DVMT 5.0 (Dynamic Video Memory Technology), allowing up to more than 512MB
dynamically allocated Video Memory (System memory is allocated when it is needed).
• On-board support for analogue CRT and LVDS panel.
• Analogue CRT Display Support (on-board), 300-MHz, 24 bit integrated RAMDAC with
support for analogue monitors up to QXGA (2048x1536 pixels) @ 75 Hz
• LVDS panel Support (on-board), 18/24 bit colour in up to WUXGA (1920x1200 pixels
@60 Hz and SPWG (VESA) colour coding. OpenLDI /JEIDA colour coding 18 bit
colour with or without Dithering).
• (TV-out connector not mounted, Component, S-Video and Composite interfaces,
NTSC/PAL and HDTV Graphics mode. 10-bit DAC. Macrovision not supported).
• Multiplexed PCIe x16, SDVO and TMDS.
• PCIe x16 (PCI Express 2.0) support also PCIe Graphics card.
• SDVO (Serial Digital Video Out) ports (2 channels) for additional ADD2 (Advanced
Digital Display 2) cards supporting second CRT monitor or Dual LVDS/DVI panels.
• TMDS (Transition Minimized Differential Signalling) (3 channels) for additional, HDMI
support with HDCP and HD Audio, DVI support, or DP (DisplayPort) support with 8/10
bit colours in WQXGA (2560x1600 pixels) and HDCP.
Dual independent pipes for Mirror and Dual independent display support with
combinations of SDVO/TMDS port devices and on-board CRT/LVDS.
Audio Audio, 7.1 Channel High Definition Audio Codec using the VIA 1708B codec
• Line-out
• Line-in
• Surround output: SIDE, LFE, CEN, BACK and FRONT
• Microphone: MIC1 and MIC2
• CDROM Audio input (mITX revisions below 81035x-45xx-R20, Flex and ATXE only).
• SPDIF (electrical Interface only)
• On-board speaker
(Continues)
System specification