Kontron KTGM45-mITX - Manual (Page 91)

KTGM45 Users Guide
KTD-N0793-O Page 91
7.6 Security Menu
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
Security Settings Install or Change the
password.
<-> Select Screen
|| Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Supervisor Password :Not Installed
User Password :Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection [Disabled]
Hard Disk Security
Primary Master HDD User Password
Primary Slave HDD User Password
Secondary Slave HDD User Password
v02.67+ (C)Copyright 1985-2009, American Megatrends, Inc.
Feature Options Description
Change Supervisor Password Password When not cleared the advanced Supervisor
Password protection system is enabled (see below
diagram). Hereafter setting can only be accessed
when entering BIOS as Supervisor.
User Access Level Full Access
View Only
Limited
No Access
Only visible if Supervisor Password is installed.
Full Access: User can change all BIOS settings.
View Only: User can only read BIOS settings.
Limited: User can only read settings except: Date &
Time, Quick Boot, Quiet Boot, Repost Video on S3
Resume, Active State Power-Management and
Remote Access.
No Access: User can not enter BIOS, but if
Password Check = Always then User password will
allow boot.
Change User Password Password Change the User Password
Password Check Setup
Always
Only visible if Password is installed.
Setup: Protects only BIOS settings.
Always: Protects both BIOS settings and Boot.
Boot Sector Virus Protection Enabled
Disabled
Will write protect the MBR when the BIOS is used to
access the harddrive
HDD Password Password Locks the HDD with a password, the user needs to
type the password on power on
BIOS setup