Kontron KTGM45-mITX - Manual (Page 17)

KTGM45 Users Guide
KTD-N0793-O Page 17
** Note:
Regardless of the memory configuration used (Dual Channel, Single Channel or Flex) the SLOT 1 must
always be populated. This is a requirement of the Intel® Management Engine.
The below tables shows examples of possible Memory slot configurations for the support of the various
Memory modes.
Dual Channel Interleaved Mode Configurations
DDR3 SLOT 1 (Ch. A) DDR3 SLOT 0 (Ch. B)
1 GB 1 GB
2 GB 2 GB
(The capacity of the Ch. A equals the capacity of Ch. B).
Single Channel Asymmetric Mode Configurations
DDR3 SLOT 1 (Ch. A) DDR3 SLOT 0 (Ch. B)
1 GB
2 GB
Dual Channel Flex Mode Configurations
DDR3 SLOT 1 (Ch. A) DDR3 SLOT 0 (Ch. B)
2 GB 1GB
1 GB 2 GB
The first 1GB of each of the Channels (A and B) will be used in Interleaved Mode and the remaining RAM
will be used in Asymmetric Mode.
Ch. B, DDR3 (SLOT 0)
Ch. A, DDR3 (SLOT 1) **
System specification