1 boot – boot settings configuration, Boot – boot settings configuration, Bios setup – Kontron KTGM45-mITX User Manual
Page 88
KTGM45 Users Guide
KTD-N0793-O
Page 88
7.5.1 Boot – Boot Settings Configuration
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Allows BIOS to skip
certain tests while
booting in order to
decrease boot time.
<-> Select Screen
|| Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Quick Boot [Enabled]
Quiet Boot [Disabled]
AddOn ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait for ‘F1’ If Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
Default init boot Order [0->4->3->5->2->1]
Force boot Device [Disabled]
Boot Fail Option [Wait Key Press]
Alternative initialization [Enabled]
Adaptec Raid Card Init [Disabled]
v02.67+ (C)Copyright 1985-2009, American Megatrends, Inc.
Feature
Options
Description
Quick Boot
Enabled
Disabled
Allows BIOS to skip certain tests while booting in
order to decrease boot time.
When Disabled and right after power up then
Memory Test is carried out.
Quiet Boot
Disabled
Enabled
Black Screen
White Screen
Disabled: Displays normal POST messages.
Enabled: Displays OEM Logo (no POST messages).
Black Screen: No picture.
White Screen: White picture.
AddOn ROM Display Mode
Force BIOS
Keep current
Set display mode for Option ROM.
Bootup Num-Lock
Off
On
Select Power-on state for numlock
PS/2 Mouse Support
Disabled
Enabled
Auto
Select support for PS/2 Mouse.
Wait for ‘F1’ If Error
(see note List of errors)
Disabled
Enabled
Wait for F1 key to be pressed if error occurs.
Hit ‘DEL’ Message Display Disabled
Enabled
Displays “Press DEL to run Setup” in POST.
Interrupt 19 Capture
Disabled
Enabled
Enabled: Allows option ROMs to trap interrupt 19
Default init boot Order
0->4->3->5->2->1
0->4->3->5->1->2
1->2->3->5->0->4
3->5->1->2->0->4
3->0->4->1->2->5
2->1->0->4->3->5
2->0->4->3->1->5
3->1->0->4->2->5
Control how devices will be placed in the Boot
Device Priority Menu:
0 = “Removables”
1 = “Hard disk”
2 = “Atapi cdrom”
3 = “BEV/on-board LAN” (see note)
4 = “USB”
5 = “External LAN”
(Continues)
BIOS setup