Kontron KTGM45-mITX - Manual (Page 96)

KTGM45 Users Guide
KTD-N0793-O Page 96
Feature Options Description
DVMT Memory size 128MB
256MB
Maximum DVMT
This setting is only available for WinXP
PAVP Mode Disabled
Lite
High
GMCH Protected Audio Video Path (PAVP)
BIOS support.
Boot Display Device
(see note)
VBIOS-Default
CRT
TV
CRT+TV
SDVO
CRT+SDVO
LVDS
CRT+LVDS
Options
VBIOS-Default
CRT
TV
CRT+TV
SDVO
CRT+SDVO
LVDS
CRT+LVDS
TV Standard VBIOS-Default
NTSC
PAL
SECAM
SMPTE240M
ITU-R television
SMPTE295M
SMPTE296M
EIA-770.2
EIA-770.3
Options
VBIOS-Default
NTSC
PAL
SECAM
SMPTE240M
ITU-R television
SMPTE295M
SMPTE296M
EIA-770.2
EIA-770.3
Spread Spectrum Disabled
Enabled
Options
Disabled
Enabled
HDCP Support Disabled
Enabled
HDCP provisioning BIOS
LVDS (see description ->) Select Resolution, Manufacturer and Type no.
for the actual LVDS display.
SDVO DVI / LVDS / N/A Display module V0.0
Backlight Signal Inversion Disabled
Enabled
Select Signal polarity
LVDVCC Voltage 3.3V
5V
Options
3.3V
5V
Emulate EDID Disabled
Enabled
Options
Disabled
Enabled
Note: When using ADD2-LVDS card then it is recommended using “LVDS” setting. In case of using ADD2-
LVDS-Single alternatively use “VBIOS Defaults” setting. The “CRT+LVDS” setting is for on-board LVDS and
do not compare with ADD2-LVDS card. The second LVDS port will only be available from OS.
BIOS setup