Kontron KTGM45-mITX - Manual (Page 69)

KTGM45 Users Guide
KTD-N0793-O Page 69
BIOS SETUP UTILITY
Advanced
Primary IDE Master S elect the type of
devices connected to the
system
<- Select Screen
|| Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Device :Hard Disk
Vendor :ST340014A
Size :40.0GB
LBA Mode :Supported
Block Mode :16Sectors
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-5
S.M.A.R.T. :Supported
Type [Auto]
LBA/Large Mode [Auto]
Block (Multi-Sector Transfer) [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
S.M.A.R.T. [Auto]
32Bit Data Transfer [Enabled]
v02.67+ (C)Copyright 1985-2009, American Megatrends, Inc.
Feature Options Description
Type Not Installed
Auto
CD/DVD
ARMD
Select the type of device installed
LBA/Large Mode Disabled
Auto
Enabling LBA causes Logical Block Addressing to be
used in place of Cylinders, Heads, and Sectors.
Block (Multi-Sector Transfer) Disabled
Auto
Select if the device should run in Block mode
PIO Mode Auto
0
1
2
3
4
Selects the method for transferring the data between
the hard disk and system memory. The Setup menu
only lists those options supported by the drive and
platform.
DMA Mode Auto
SWDMA0
SWDMA1
SWDMA2
MWDMA0
MWDMA1
MWDMA2
UDMA0
UDMA1
UDMA2
UDMA3
UDMA4
UDMA5
UDMA6
Selects the Ultra DMA mode used for
moving data to/from the drive. Autotype the drive to
select the optimum transfer mode.
Note: To use UDMA Mode 2, 3, 4, 5 and 6 with a
device, the harddisk cable used MUST be
UDMA66/100 cable (80-conductor cable).
S.M.A.R.T. Auto
Disabled
Enabled
Select if the Device should be monitoring itself (Self-
Monitoring, Analysis and Reporting Technology
System)
32Bit Data Transfer Disabled*
Enabled
Select if the Device should be using 32Bit data
Transfer
BIOS setup