Kontron KTGM45-mITX - Manual (Page 72)

KTGM45 Users Guide
KTD-N0793-O Page 72
7.3.3 Advanced settings – LAN Configuration
BIOS SETUP UTILITY
Advanced
LAN Configuration Control of Ethernet
Devices and PXE boot
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
ETH1 Configuration [Enabled]
GbE Wake Up From S5 [Disabled]
MAC Address & Link status : 00E0F41E24A4 +
ETH2 Configuration (Lower) [Enabled]
MAC Address & Link status : 00E0F41E24A5 -
ETH3 Configuration (Upper) [Enabled]
MAC Address & Link status : 00E0F41E24A5 -
v02.67+ (C)Copyright 1985-2009, American Megatrends, Inc.
Feature Options Description
ETH1 Configuration Disabled
Enabled
With RPL/PXE boot
Disable/enable LAN or enabled with RPL/PXE boot
GbE Wake Up From S5 Disabled
Enabled
WOL (Wake On Lan)
(See note 3)
Feature Options Description
ETH2 Configuration (Lower) Disabled
Enabled
With RPL/PXE boot
Disable/enable LAN or enabled with RPL/PXE boot
Feature Options Description
ETH3 Configuration (Upper) Disabled
Enabled
With RPL/PXE boot
Disable/enable LAN or enabled with RPL/PXE boot
Notes:
1. The “+” and “-“ (to the right of the MAC address) indicates if link is established or not.
2. ETH1 (and only ETH1) can be used for AMT.
3. WOL only possible if “Intel AMT Support” is enabled.
BIOS setup