Kontron KTGM45-mITX - Manual (Page 51)

KTGM45 Users Guide
KTD-N0793-O Page 51
3.14 Clear CMOS Jumper (J13)
The Clear-CMOS Jumper (J13) is used to clear the CMOS content.
J13
Description pin1-2 pin2-3
X - Default positions
- X Clear CMOS data *
- - Secure CMOS function is disabled and Default values are used
WARNING: Don’t leave the jumper in this position, otherwise if power is disconnected the battery will fully
depleted within a few weeks.
To clear CMOS settings, including Password protection, move the Clear CMOS jumper to pin 2-3 for a few
seconds (~10 sec) (works with or without power connected to the system).
KTGM45/mITX KTGM45/Flex
J13 (in default position)
KTGM45/ATXE
Connector Definitions