Lights and windshiel dw iper s, Replacing bulbs – Mercedes-Benz C-Sedan 2014 Owners Manual User Manual

Page 123

Advertising
background image

Crash-responsive emergency lighting

The interior lighting is activated automatically

if the vehicle is involved in an accident.

X

To switch off the crash-responsive

emergency lighting: press the hazard

warning lamp button.

or

X

Lock and then unlock the vehicle using the

SmartKey.

Replacing bulbs

Important safety notes

Xenon bulbs

G

DANGER

Xenon bulbs carry a high voltage. You can get

an electric shock if you remove the cover of

the Xenon bulb and touch the electrical

contacts. There is a risk of fatal injury.
Never touch the parts or the electrical

contacts of the Xenon bulb. Always have work

on the Xenon bulbs carried out at a qualified

specialist workshop.

If your vehicle is equipped with Xenon bulbs,

you can recognize this by the following: the

cone of light from the Xenon bulbs moves

from the top to the bottom and back again

when you start the engine. For this to be

observed, the lights must be switched on

before starting the engine.
Bulbs and lamps are an important aspect of

vehicle safety. You must therefore make sure

that these function correctly at all times.

Have the headlamp setting checked regularly.

Other bulbs

G

WARNING

Bulbs, lamps and connectors can get very hot

when operating. If you change a bulb, you

could burn yourself on these components.

There is a risk of injury.

Allow these components to cool down before

changing a bulb.

Do not use a bulb that has been dropped or if

its glass tube has been scratched.
The bulb may explode if:

R

you touch it

R

it is hot

R

you drop it

R

you scratch it

Only operate bulbs in enclosed lamps

designed for that purpose. Only install spare

bulbs of the same type and the specified

voltage.
Marks on the glass tube reduce the service

life of the bulbs. Do not touch the glass tube

with your bare hands. If necessary, clean the

glass tube when cold with alcohol or spirit and

rub it off with a lint-free cloth.
Protect bulbs from moisture during

operation. Do not allow bulbs to come into

contact with liquids.
There are bulbs other than the Xenon bulbs

that you cannot replace. Replace only the

bulbs listed (

Y

page 121). Have the bulbs that

you cannot replace yourself changed at a

qualified specialist workshop.
If you require assistance changing bulbs,

consult a qualified specialist workshop.
If the new bulb still does not light up, consult

a qualified specialist workshop.
Bulbs and lamps are an important aspect of

vehicle safety. You must therefore make sure

that these function correctly at all times.

Have the headlamp setting checked regularly.

Overview: changing bulbs/bulb types

You can change the following bulbs. The bulb

type can be found in the legend.

Replacing bulbs

121

Lights

and

windshiel

dw

iper

s

Z

Advertising