Mercedes-Benz C-Sedan 2014 Owners Manual - Manual (Page 220)

Activating/deactivating the radar sensor
system
X
Press the = or ; button on the
steering wheel to select the Sett. menu.
X
Press the : or 9 button to select the
Vehicle submenu.
X Press a to confirm.
X
Press the 9 or : button to select
Radar Sensor (See Oper. Manual): .
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
The following systems are switched off when
the radar sensor system is deactivated:
R DISTRONIC PLUS (
Y
page 173)
R BAS PLUS (
Y
page 66)
R PRE-SAFE ® Brake (
Y
page 71)
R Blind Spot Assist (
Y
page 193)
R Active Blind Spot Assist (
Y
page 196)
Convenience
Activating/deactivating the EASY-
ENTRY/EXIT feature
G WARNING
When the EASY-ENTRY/EXIT feature adjusts
the steering wheel, you and other vehicle
occupants – particularly children – could
become trapped. There is a risk of injury.
While the EASY-ENTRY/EXIT feature is
making adjustments, make sure that no one
has any body parts in the sweep of the
steering wheel.
If somebody becomes trapped:
R press one of the memory function position
buttons, or
R move the switch for steering wheel
adjustment in the opposite direction to that
in which the steering wheel is moving.
The adjustment process is stopped.
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X Press the : or 9 button to select the
Convenience submenu.
X
Press a to confirm.
X Press the : or 9 button to select the
Easy Entry/Exit function.
If the Easy Entry/Exit function is
activated, the vehicle steering wheel is
displayed in orange in the multifunction
display.
X Press the a button to save the setting.
Further information on the EASY-ENTRY/EXIT
feature (
Y
page 106).
Switching the belt adjustment on/off
X
Press the = or ; button on the
steering wheel to select the Sett. menu.
X Press the : or 9 button to select the
Convenience submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Belt Adjustment function.
When the Belt Adjustment function is
activated, the vehicle seat belt is displayed
in orange in the multifunction display.
X Press the a button to save the setting.
For further information on belt adjustment,
see (
Y
page 56).
Switching the fold-in mirrors with the
locking feature on/off
This function is only available on vehicles with
the memory function (
Y
page 110).
This function is only available in Canada.
When you activate the
Auto. Mirror
Folding function, the exterior mirrors are
folded in when the vehicle is locked. If you
unlock the vehicle and then open a door, the
exterior mirrors fold out again.
X
Press the = or ; button on the
steering wheel to select the Sett menu.
X Press the : or 9 button to select the
Convenience submenu.
218
Menus and submenus
On-board
computer
and
displays