On-board computer and displays, Displays and operation – Mercedes-Benz C-Sedan 2014 Owners Manual User Manual

Page 207

Advertising
background image

Under normal operating conditions and with

the specified coolant level, the coolant

temperature may rise to 248 ‡ (120 †).

!

A display message is shown if the coolant

temperature is too high.
If the coolant temperature is over

248 ‡(120 †), do not continue driving. The

engine will otherwise be damaged.

Tachometer

The red band in the tachometer indicates the

engine's overrevving range.

!

Do not drive in the overrevving range, as

this could damage the engine.

The fuel supply is interrupted to protect the

engine when the red band is reached.

Outside temperature display

You should pay special attention to road

conditions when temperatures are around

freezing point.
The outside temperature display is in the

multifunction display (

Y

page 206).

Changes in the outside temperature are

displayed after a short delay.

Speedometer with segments

The segments in the speedometer indicate

which speed range is available.

R

Cruise control activated (

Y

page 171):

The segments light up from the stored

speed to the maximum speed.

R

DISTRONIC PLUS activated (

Y

page 173):

One or two segments in the set speed

range light up.

R

DISTRONIC PLUS detects a vehicle in front:
The segments between the speed of the

vehicle in front and the stored speed light

up.

Operating the on-board computer

Overview

The on-board computer is activated as soon

as you turn the SmartKey to position 1 in the

ignition lock.
You can control the multifunction display and

the settings in the on-board computer using

the buttons on the multifunction steering

wheel.

:

Multifunction display

;

Switches on the Voice Control System;

see the separate operating instructions

=

Right control panel

?

Left control panel

A

Back button

Displays and operation

205

On-board

computer

and

displays

Z

Advertising