Wheels and tires, Tire pressure – Mercedes-Benz C-Sedan 2014 Owners Manual User Manual

Page 326

Advertising
background image

The tire pressure monitor is not able to warn

you of a sudden loss of pressure, e.g. if the

tire is penetrated by a foreign object. In the

event of a sudden loss of pressure, bring the

vehicle to a halt by braking carefully. Avoid

abrupt steering maneuvers.
The tire pressure monitor has a yellow

warning lamp in the instrument cluster for

indicating a pressure loss or malfunction.

Whether the warning lamp flashes or lights up

indicates whether a tire pressure is too low or

the tire pressure monitor is malfunctioning:

R

if the warning lamp is lit continuously, the

tire pressure on one or more tires is

significantly too low. The tire pressure

monitor is not malfunctioning.

R

if the warning lamp flashes for around a

minute and then remains lit constantly, the

tire pressure monitor is malfunctioning.

i

In addition to the warning lamp, a

message appears in the multifunction

display.
Further information can be found on

(

Y

page 242).

If the tire pressure monitor is malfunctioning,

it may take more than ten minutes for the tire

pressure warning lamp to inform you of the

malfunction by flashing for approximately one

minute and then remaining lit. When the

malfunction has been rectified, the tire

pressure warning lamp goes out after a few

minutes of driving.
The tire pressure values indicated by the on-

board computer may differ from those

measured at a gas station with a pressure

gauge. The tire pressures shown by the on-

board computer refer to those measured at

sea level. At high altitudes, the tire pressure

values indicated by a pressure gauge are

higher than those shown by the on-board

computer. In this case, do not reduce the tire

pressures.
The operation of the tire pressure monitor can

be affected by interference from radio

transmitting equipment (e.g. radio

headphones, two-way radios) that may be

being operated in or near the vehicle.

Checking the tire pressure

electronically

X

Make sure that the SmartKey is in position

2 in the ignition lock (

Y

page 147).

X

Press the = or ; button on the

steering wheel to select the

Service

menu.

X

Press the 9 or : button to select

Tire Pressure

.

X

Press the a button.

The current tire pressure of each tire is

shown in the multifunction display.

If the vehicle has been parked for over

20 minutes, the

Tire pressures will be

displayed after driving a few

minutes

message appears.

After a teach-in process, the tire pressure

monitor automatically detects new wheels or

new sensors. As long as a clear allocation of

the tire pressure value to the individual

wheels is not possible, the

Tire Pressure

Monitor Active

display message is shown

instead of the tire pressure display. The tire

pressures are already being monitored.

i

If a spare wheel/emergency spare wheel

is mounted, the system may continue to

show the tire pressure of the wheel that has

been removed for a few minutes. If this

occurs, note that the value displayed for

the position where the spare tire is

mounted is not the same as the spare

wheel/emergency spare wheel's current

tire pressure.

324

Tire pressure

Wheels

and

tires

Advertising