Wheels and tires, Tire labeling – Mercedes-Benz C-Sedan 2014 Owners Manual User Manual

Page 333

Advertising
background image

specified government test surfaces of asphalt

and concrete. A tire marked C may have poor

traction performance.
The safe speed on a wet, snow covered or icy

road is always lower than on dry road

surfaces.
You should pay special attention to road

conditions when temperatures are around

the freezing point.
Mercedes-Benz recommends a minimum

tread depth of ã in (4 mm) for all four winter

tires (

Y

page 316) to maintain normal driving

characteristics in winter. Winter tires can

reduce the braking distance on snow-covered

surfaces in comparison with summer tires.

Stopping distance, however, is still

considerably greater than when the road is

not covered with ice or snow. Take

appropriate care when driving.

!

Avoid wheelspin. This can lead to damage

to the drive train.

Temperature

G

WARNING

The temperature grade for this tire is

established for a tire that is properly inflated

and not overloaded. Excessive speed,

underinflation, or excessive loading, either

separately or in combination, can cause

excessive heat build-up and possible tire

failure.

The temperature grades are A (the highest),

B, and C. These represent the tire's

resistance to the generation of heat and its

ability to dissipate heat when tested under

controlled conditions on a specified indoor

laboratory test wheel. Sustained high

temperature can cause the material of the tire

to degenerate and reduce tire life, and

excessive temperature can lead to sudden

tire failure. The grade C corresponds to a level

of performance which all passenger car tires

must meet under the Federal Motor Vehicle

Safety Standard No. 109. Grades B and A

represent higher levels of performance on the

laboratory test wheel than the minimum

required by law.

Tire labeling

Overview of tire labeling

The following markings are on the tire in

addition to the tire name (sales designation)

and the manufacturer's name:

:

Uniform Tire Quality Grading Standard

(

Y

page 335)

;

DOT, Tire Identification Number

(

Y

page 334)

=

Maximum tire load (

Y

page 329)

?

Maximum tire pressure (

Y

page 320)

A

Manufacturer

B

Tire material (

Y

page 335)

C

Tire size designation, load-bearing

capacity and speed index (

Y

page 332)

D

Load index (

Y

page 334)

E

Tire name

i

Tire data is vehicle-specific and may

deviate from the data in the example.

Tire labeling

331

Wheels

and

tires

Z

Advertising