Safety, Occupant safety – Mercedes-Benz C-Sedan 2014 Owners Manual User Manual

Page 58

Advertising
background image

G

WARNING

Do not pass seat belts over sharp edges. They

could tear.
Do not allow the seat belt to get caught in the

door or in the seat adjustment mechanism.

This could damage the seat belt.
Never attempt to make modifications to seat

belts. This could impair the effectiveness of

the seat belts.

Fastening seat belts

G

WARNING

According to accident statistics, children are

safer when properly restrained on the rear

seats than on the front-passenger seat. Thus,

we strongly recommend that children be

placed in the rear seat whenever possible.

Regardless of seating position, children 12

years old and under must be seated and

properly secured in an appropriately sized

child restraint system or booster seat

recommended for the size and weight of the

child. For additional information, see the

"Children in the vehicle" section.
A child's risk of serious or fatal injuries is

significantly increased if the child restraints

are not properly secured in the vehicle and/

or the child is not properly secured in the child

restraint.

X

Adjust the seat and move the backrest to

an almost vertical position (

Y

page 98).

X

Pull the seat belt smoothly through belt

sash guide :.

X

Without twisting it, guide the shoulder

section of the seat belt across the middle

of your shoulder and the lap section across

your pelvis.

X

Engage belt tongue ; in buckle =.

X

If necessary, adjust the seat belt to the

appropriate height (

Y

page 56).

X

If necessary, pull upwards on the shoulder

section of the seat belt to tighten the belt

across your body.

All seat belts except the driver's seat belt are

equipped with a special seat belt retractor to

securely fasten child restraint systems in the

vehicle. For further information on special

seat belt retractors, see (

Y

page 61).

For more information about releasing the seat

belt with release button ?, see "Releasing

seat belts" (

Y

page 57).

Seat belt adjustment

The seat-belt adjustment function adjusts the

driver's and front-passenger seat belt to the

upper body of the occupants.
The belt strap is tightened slightly when:

R

you engage the belt tongue in the belt

buckle and you then turn the SmartKey to

position 2 in the ignition lock.

The seat-belt adjustment is an integral part of

the PRE-SAFE

®

convenience function. More

information about PRE-SAFE

®

can be found

in the "PRE-SAFE

®

(anticipatory occupant

protection system)" section (

Y

page 52).

Belt height adjustment

You can adjust the seat belt height on the

driver's seat and the front-passenger seat.

56

Occupant safety

Safety

Advertising