Driving and parking, Automatic transmission – Mercedes-Benz C-Sedan 2014 Owners Manual User Manual

Page 163

Advertising
background image

Problems with the transmission

Problem

Possible causes/consequences and M Solutions

The transmission has

problems shifting gear.

The transmission is losing oil.

X

Have the transmission checked at a qualified specialist

workshop immediately.

The acceleration ability

is deteriorating.
The transmission no

longer changes gear.

The transmission is in emergency mode.
It is only possible to shift into second gear and reverse gear.

X

Stop the vehicle.

X

Shift the transmission to position P.

X

Switch off the engine.

X

Wait at least ten seconds before restarting the engine.

X

Shift the transmission to position D or R.

If D is selected, the transmission shifts into second gear; if R is

selected, the transmission shifts into reverse gear.

X

Have the transmission checked at a qualified specialist

workshop immediately.

Releasing the parking lock manually

In the event of an electrical malfunction, it is

possible to release the selector lever lock

manually to move it out of position P. This is

the case, for example, if you wish to tow the

vehicle away.

!

Do not use any sharp-edged objects to

remove the selector lever gaiter from the

center console. This could damage the

selector lever gaiter.

X

Apply the parking brake.

X

Pry off selector lever gaiter : with a flat,

blunt object (e.g. a screwdriver wrapped in

cloth) from the right-hand edge. Pull

selector lever gaiter : up and out.

X

Press release button ; down and

simultaneously move the selector lever out

of position P.

The selector lever can now be moved freely

until it is returned to position P.

Transfer case

This section is only valid for vehicles with 4-

wheel drive (4MATIC). Power is always

transmitted to both axles.

!

Performance tests may only be carried

out on a 2-axle dynamometer. The brake

system or transfer case could otherwise be

damaged. Contact a qualified specialist

workshop for a performance test.

!

If the parking brake is being tested on a

brake dynamometer, the ignition must be

switched off (SmartKey or Start/Stop

button in position 0 or 1), as ESP

®

will

Automatic transmission

161

Driving

and

parking

Z

Advertising