Wheels and tires, Operation – Mercedes-Benz C-Sedan 2014 Owners Manual User Manual

Page 316

Advertising
background image

Useful information

i

This Operator's Manual describes all

models and all standard and optional

equipment of your vehicle available at the

time of publication of the Operator's

Manual. Country-specific differences are

possible. Please note that your vehicle may

not be equipped with all features

described. This also applies to safety-

related systems and functions.

i

Read the information on qualified

specialist workshops: (

Y

page 25).

Important safety notes

G

WARNING

If wheels and tires of the wrong size are used,

the wheel brakes or suspension components

may be damaged. There is a risk of an

accident.
Always replace wheels and tires with those

that fulfill the specifications of the original

part.
When replacing wheels, make sure to use the

correct:

R

designation

R

model

When replacing tires, make sure to use the

correct:

R

designation

R

manufacturer

R

model

G

WARNING

A flat tire severely impairs the driving,

steering and braking characteristics of the

vehicle. There is a risk of accident.
Tires without run-flat characteristics:

R

do not drive with a flat tire.

R

immediately replace the flat tire with your

emergency spare wheel or spare wheel, or

consult a qualified specialist workshop.

Tires with run-flat characteristics:

R

pay attention to the information and

warning notices on MOExtended tires (tires

with run-flat characteristics).

Accessories that are not approved for your

vehicle by Mercedes-Benz or that are not

being used correctly can impair operating

safety.
Before purchasing and using non-approved

accessories, visit a qualified specialist

workshop and inquire about:

R

suitability

R

legal stipulations

R

factory recommendations

Information on the dimensions and types of

wheels and tires for your vehicle can be found

in the "Wheel/tire combinations" section

(

Y

page 342).

Information on air pressure for the tires on

your vehicle can be found:

R

on the vehicle's Tire and Loading

Information placard on the B-pillar

R

on the tire pressure label on the fuel filler

flap

R

in the "Tire pressure" section

Modification work on the brake system and

wheels is not permitted. The use of wheel

spacers or brake dust shields is not

permitted. This invalidates the general

operating permit for the vehicle.

i

Further information on wheels and tires

can be obtained at any qualified specialist

workshop.

Operation

Information on driving

R

If the vehicle is heavily loaded, check the

tire pressures and correct them if

necessary.

R

While driving, pay attention to vibrations,

noises and unusual handling

314

Operation

Wheels

and

tires

Advertising