Comand, At a glance – Mercedes-Benz S-Class 2011 User Manual

Page 137

Advertising
background image

X

Select

Sound

by sliding VÆ and turning

cVd the COMAND controller and press
W to confirm.

X

Select

3D sound

and press W to confirm.

:

Current setting

X

Select the

Logic7

®

On

or

Logic7

®

Off

setting by turning cVd the COMAND
controller and press W to confirm.
Depending on your selection, surround
sound is switched on or off and the menu
is exited.

X

To exit the menu without saving: press

the % back button or slide XVY the
COMAND controller.

i

Please bear the following in mind:

For an optimum audio experience on all
seats when Logic7

®

is switched on,

balance and fader should be set to the
center of the passenger compartment.
You will achieve the best sound results by
playing high-quality audio and video DVDs.
MP3 tracks should have a bit rate of at least
128 kbit/s.
Surround-sound playback does not
function for mono signal sources, such as
AM radio mode.
If radio reception is poor, e.g. in a tunnel,
you should switch off Logic 7

®

, as it may

otherwise switch between stereo and
mono and cause temporary sound
distortions.

On some stereo recordings, the sound
characteristics may differ from
conventional stereo playback.

Bang & Olufsen sound system
Vehicles with a Bang & Olufsen sound system:
There are two settings available with

True

Image

™ sound technology:

R

reference

This setting provides a crisp, clear, luxury
high-end sound setting for a studio
atmosphere in your vehicle.

R

3D sound

This setting enables a wide-ranging sound
experience for playing music and videos.

The

Sound Mode

function can be used to

optimize the selected sound setting for one
seat. The settings

left

,

all

and

right

can

be selected.
The Bang & Olufsen sound system provides
the following operating modes:

R

radio (FM only)

R

audio CD

R

audio DVD (MLP, dts, PCM and Dolby
Digital audio formats)

R

MP3

R

Media Interface

R

video DVD (PCM, dts and Dolby Digital
audio formats)

R

AUX

Because some DVDs contain both stereo and
multi-channel audio formats, it may be
necessary to set the audio format
(

Y

page 223).

Discs which support the audio formats
mentioned have the following logos:

Dolby

®

Digital

At a glance

135

COMAND

Z

Advertising