Video, Vehicle equipment, General information – Mercedes-Benz S-Class 2011 User Manual
Page 237: Comand
If COMAND is equipped with a Media
Interface, external audio sources are
connected using the associated cable set.
The audio cable set then replaces the audio
AUX socket.
i
You can find more information on the
Internet at
http://www.mercedes-
benz.com/connect and in the "Media
Activating audio AUX mode
When you connect an external audio source,
audio AUX is not selected automatically.
X
Select
Audio
in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Select
Aux
using cVd and press W to
confirm.
The audio AUX menu appears. The medium
in the external audio source is played, if the
source is connected and playback
selected.
Please see the respective operating
instructions for how to operate the external
audio source.
You will find details on volume (
page 133) settings in the "At a
glance" section.
G
Warning!
External audio sources may have different
volumes, which can mean that system
messages such as traffic announcements and
navigation system announcements are much
louder. If necessary, please deactivate the
system messages or adjust their volume
manually.
Increasing the volume
In some cases, the volume of the external
audio device may be quieter or louder, or the
usual maximum possible volume may be
lower. On some devices, it is possible to
adjust the volume separately. In this case,
start at a medium volume and increase it
gradually. This enables you to determine
whether the system is able to play tones at
high volume without distorting them.
Video
Vehicle equipment
i
These Operating Instructions describe all
standard and optional equipment available
for your vehicle at the time of purchase.
Please note that your vehicle may not be
equipped with all features described.
General information
Automatic picture shutoff
If the vehicle is traveling at speeds above
approximately 3 mph (5 km/h), the picture
is shutoff in video DVD mode.
The video is only displayed when the
transmission selector lever is in position
P.
If the transmission selector lever is moved out
of position
P, the
In order not to
distract the driver, the picture is
faded out while the vehicle is in
motion.
message appears.
As soon as the vehicle speed falls below
approximately 3 mph (5 km/h), the picture is
switched on again.
Video
235
COMAND
Z