Mercedes-Benz S-Class 2011 - Manual (Page 379)

Maintenance menu
In the Service menu you can:
R
call up display messages ( Y page 380)
R
check the tire pressure electronically
(
Y page 487)
R call up the service due date ( Y page 452)
R check the oil level ( Y page 447)
Menu settings
Introduction
In the Settings menu, you have the following
options:
R switching the daytime running lamps on/
off
R
switching Adaptive Highbeam Assist on/
off
R
showing or hiding the additional
speedometer
R
selecting the units for speed and distance
R
switching the belt adjustment on/off
R
activating/deactivating the radar sensor
system
Switching the daytime running lamps
on/off
This function is not available in Canada.
If you have activated the
Day Running
Lights function and the light switch is set to
$ or c, the daytime running lamps are
switched on automatically when the engine is
running.
In the dark, the following also light up:
R
the side lamps
R
the tail lamps
R the license plate lamp
R the side marker lamp
If you turn the light switch to a different
position, the corresponding lights are
switched on. If you switch off the daytime
running lamps at night, make sure that the
light switch is set to L or c.
The factory setting is Enabled .
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the 9 or : button to select
Day Running Lights .
X Press the a button to confirm.
X To activate/deactivate: press a
again.
Switching Adaptive Highbeam Assist
on/off
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select
Adapt. High-beam Asst. .
X Press the a button to confirm.
X To activate/deactivate: press a
again.
Switching the additional speedometer
on or off
An additional digital speedometer can be
shown in the multifunction display.
Vehicles with a kilometer speedometer: the
digital speedometer has mph units.
Vehicles with a miles speedometer: the digital
speedometer has km/h units.
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press 9 or : to select Add.
Speedometer .
X Press the a button to confirm.
X Press the a button to save the setting.
Selecting the unit of measurement for
distance
The Display Unit Speed-/Odometer
function allows you to choose whether
certain displays appear in km/h or mph.
Menus and submenus
377
On-board computer and displays
Z