Comand, Audio – Mercedes-Benz S-Class 2011 User Manual
Page 218
Option 2
X
Select
Sat. Radio
in the submenu bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select
Enter Channel
and press W to
confirm.
An input menu appears.
X
To enter a channel: irrespective of the
option chosen, press the corresponding
number keys on the control panel one after
the other.
COMAND sets the selected channel.
i
You can only select currently permitted
digits.
Selecting a channel from the SatRadio
channel list
X
Select
Sat. Radio
in the submenu bar by
turning cVd the COMAND controller and
press W to confirm.
X
Select
Channel List
and press W to
confirm.
The channel list appears.
X
Select a channel by turning cVd the
COMAND controller and press W to
confirm.
Memory functions
Storing channels
i
There are ten presets available.
X
Press W the COMAND controller when the
display/selection window is active.
or
X
Select
Presets
in the submenu bar by
turning cVd the COMAND controller and
press W to confirm.
In both cases, the channel presets appear.
The R dot in front of a preset entry
indicates that the currently selected
station is stored under this preset.
X
Select a preset by turning cVd the
COMAND controller and press and hold
W until you hear a tone.
or
X
Press and hold a number button, e.g.
4,
until you hear a tone.
The channel is stored under the preset.
Storing channels automatically
This function automatically stores channels
with adequate reception. Stations stored
manually in the preset memory will be
overwritten.
X
Option 1: press W the COMAND controller
when the display/selection window is
active.
X
Select
Autostore
in the presets by turning
cVd the COMAND controller and press
W to confirm.
X
Option 2: select
Presets
in the submenu
by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
X
Select
Autostore
and press W to confirm.
In both cases, COMAND searches for
channels that can be received. You will see
a message to this effect. The available
channels are automatically stored in the
preset positions.
X
To cancel storing: select
Cancel
and
press W to confirm.
Selecting a channel from the preset list
X
To call up the channel list: select
Presets
by turning cVd the COMAND
controller and press W to confirm.
The channel preset list appears.
X
To set a channel: select a preset by
turning cVd the COMAND controller and
press W to confirm.
or
X
Press a number key, e.g.
4.
216
Audio
COMAND