Comand, Vehicle – Mercedes-Benz S-Class 2011 User Manual
Page 272
X
Select
Upload/download data
and press
W to confirm.
X
Select
Copy data to storage medium
and press W to confirm.
X
Select the storage medium to which the
data should be copied.
X
Select
Start copying
.
COMAND checks whether the storage
medium has enough storage capacity. If
there is enough storage capacity, the data
is copied to the storage medium.
X
If there is not enough storage capacity,
remove the storage medium. Make more
storage space available on the storage
medium. Then, try to copy the COMAND
data to the storage medium again.
X
Remove the storage medium.
Transferring data to another system
(vehicle)
X
Insert/connect the storage medium (SD
card or USB stick) with the saved data into/
to the relevant interface.
X
Select
Vehicle
in the main function bar by
turning cVd the COMAND controller and
press W to confirm.
The "Vehicle" menu appears.
X
Select
System
and press W to confirm.
X
Select
Upload/download data
and press
W to confirm.
X
Select
Import data from storage
medium
and press W to confirm.
X
Select
Start data import
.
A prompt appears, asking whether the
COMAND data should be overwritten.
X
Press
Yes
to confirm that the data saved in
COMAND should be overwritten.
COMAND imports the data and restarts the
system.
or
X
Press
No
to cancel the import process.
270
Vehicle
COMAND