Comand, Navigation – Mercedes-Benz S-Class 2011 User Manual
Page 164
list contains all the points of interest which
cannot be assigned to any sub-category of
the
Restaurant
main category and that lie
within the search radius.
Point of interest list
Introduction
The illustration below shows an example
of the point of interest list for the
RESTAURANT
main category and
BREWPUB
sub-category in the vicinity of the current
position.
:
Direction display from current position to
point of interest
;
Linear distance to the point of interest
=
Point of interest
?
Selected sub-category
i
Depending on the point of interest
selected, COMAND uses different
reference points in determining the linear
distance to the destination:
R
vicinity of current position: the linear
distance is the distance of the point of
interest from the current vehicle
position.
R
vicinity of destination: the linear distance
is the distance of the point of interest
from the destination entered.
Selecting a point of interest
X
Select the point of interest by turning
cVd the COMAND controller and press
W to confirm.
The full address of the point of interest
selected appears.
:
Point of interest with address
;
To start route calculation
=
To store an address in the destination
memory
?
To display details
A
To make a call (when available)
B
To cancel selection
C
To show an address on the map
X
To start route calculation: select
Start
and press W to confirm.
X
To store an address in the destination
memory: select
Save
and press W to
confirm. You can now select storage
options (
X
To show the detailed view: select
Details
and press W to confirm.
X
To make a call: select
Call
and press W
to confirm (available if the point of interest
entry contains a phone number and a
telephone is connected to COMAND).
COMAND switches to the telephone
function (
X
To call up the map: select
Map
and press
W to confirm.
X
You can scroll the map and select a
destination (
162
Navigation
COMAND