Mercedes-Benz C-Class 2008 COMAND Manual - Manual (Page 12)

11
Introduction
Operating safety
DaimlerChrysler declares herewith that
this device conforms to the basic
requirements and the other relevant
regulations of Directive 1999/5/EC (RTTE
Directive).
Please bear the following information in
mind when using the COMAND:
ț The safety instructions in this guide
ț Road Traffic Regulations
i
Tampering with electronic components or
systems (e.g. radio, DVD changer) and their soft-
ware may result in malfunctioning. Systems
which have not been changed may be affected
due to the connectivity of the electronics.
Malfunctions of the electronics can seriously en-
danger the operational safety of your vehicle.
i
Always have all work or modifications to
electronic components carried out by a qualified
specialist workshop with the necessary exper-
tise and tools for any work required.
DaimlerChrysler recommends a Mercedes-Benz
Service centre for this purpose.
Especially for safety-related operations and op-
erations on safety-related systems, servicing by
a qualified specialist workshop is essential.
For safety reasons, some COMAND func-
tions are restricted or not available when
the vehicle is moving. This can be recog-
nized, for example, from the fact that cer-
tain menu items cannot be selected or the
COMAND displays a corresponding mes-
sage.
Declaration of conformity regarding
the distribution of telecommunica-
tions equipment
Intended purpose
Function restrictions when driving
the vehicle