Mercedes-Benz C-Class 2008 COMAND Manual - Manual (Page 36)

35
At a glance
Basic functions of COMAND
i
The COMAND components can be found on
( ୴ page 14). Operating examples can be found
on ( ୴ page 31).
i
For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. for volume setting the
ж, з
buttons, ( ୴ page 23).
̈ Press the rotary/push button x .
or
̈ Press the display cover button
The cover opens up and the
COMAND display folds out. A warning
message appears. COMAND opens the
last active menu.
i
When COMAND is switched off, playback of
the current audio or video source is also
switched off.
̈ To switch on/off: Press V .
The sound from the active audio or
video source is switched on or off.
i
When the sound is switched off, the symbol
X appears in the status line.
If you change the audio or video source or alter
the volume, the sound is automatically switched
on again.
i
Announcements from the navigation system
can still be heard with the sound switched off.
Switching navigation announcements
on/off
̈ Press V during the announcement.
i
The navigation announcements are
switched on again after restarting route guid-
ance or after switching COMAND off/on using
x .
̈ To set: Turn the rotary/push button
x .
The volume of the selected audio or
video source changes.
Volume of navigation announcements
You can set the volume for navigation an-
nouncements independently of the volume
for the active audio or video source.
During a navigation announcement:
̈ Turn the rotary/push button x .
Setting volume for phone calls
The volume for hands-free operation can
be set during an active phone call.
̈ Turn the rotary/push button x .
Basic functions of COMAND
Switching COMAND on/off
Mute
Setting the volume