Mercedes-Benz C-Class 2008 COMAND Manual - Manual (Page 121)

120
Navigation
Introduction
Saving crosshairs position as destina-
tion in the last destinations
̈ To display menu system if applica-
ble: Press
n.
̈ To save: Select “Position” K “Save
Crosshair Position”.
COMAND saves the crosshairs position
as a destination in the last destinations
memory (
୴ page 162). A window ap-
pears containing a corresponding mes-
sage.
Hiding crosshairs
̈ Press the í button.
The crosshairs disappear and the map
is set to the vehicle location.
or
̈ Set the map to the vehicle location, see
description below.
Setting map to vehicle or destination
location
i
If you have moved the map, you can quickly
move the map to the vehicle or destination loca-
tion using this function. It is only possible to set
it to the destination location when route guid-
ance is active.
̈ To display menu system if applica-
ble: Press
n.
̈ To set map to vehicle location:
Select “Position”
K “Vehicle Position
Map”.
or
̈ Press the í button if the crosshairs
are displayed.
i
This hides the crosshairs.
̈ To set to destination location: Select
“Position”
K “Destination Position
Map”.
The crosshairs position is then set to
the destination.
i
You can perform the settings listed below
with route guidance inactive or active.
Map display
Map orientation
1 Currently set map orientation
The following displays are possible:
ț 9 = orientation to north (the map dis-
play is oriented to the north, north is al-
ways at the top)
ț 8 = Driving direction (the map display
is oriented in the direction of travel, the
direction of travel is always at the top,
the orange tip of the symbol points
northwards)
Basic settings