Mercedes-Benz C-Class 2008 COMAND Manual - Manual (Page 43)

42
Audio
Radio
You can switch the radio between the FM,
AM, and WB wavebands.
̈ Select “FM” 7, “AM” 6 or “WB” 5 in
the radio display.
The last selected station in the select-
ed waveband is heard.
i
In the WB waveband, COMAND displays the
Channel name instead of the station names
and/or frequency.
or
̈ Press the X function button on the
control unit repeatedly until the desired
band is selected.
i
Press the button repeatedly to switch wave-
band in the sequence of FM, AM, WB and
SatRadio* mode (
୴ page 47). Pressing again will
switch back to FM radio mode.
You can tune to a station via station search
or by manual frequency input.
Tuning to a station via station search
̈ Rotate y m z or slide o m p if the dis-
play/selection window is highlighted.
or
̈ Press
G or H on the COMAND
control unit.
The search proceeds upwards or down-
wards and stops at the next receivable
station.
Tuning to a station via manual
frequency input
̈ Select “Radio” K “Enter Frequency” in
the radio display.
An input menu appears.
or
̈ Press ß on the control unit.
̈ To enter a frequency: Press number
buttons on the control unit.
i
You can only select numbers that are cur-
rently permissible.
COMAND will tune to the frequency en-
tered.
i
If in the FM or AM wavebands you enter a
frequency outside the frequency sub-range, CO-
MAND will select the next frequency down.
Tuning to a station via the station
memory
̈ Select “Presets” in the radio display.
or
̈ Press n if the display/selection win-
dow is highlighted.
The station memory appears. The
dot
R in front of a preset indicates that
the currently tuned station is stored
there.
̈ To select a station: Rotate y m z or
slide q m r .
̈ To tune to a station: Press n.
or
̈ Press a number key, e.g. 4 , on the
control unit.
Switching wavebands Tuning to a station