Mercedes-Benz C-Class 2008 COMAND Manual - Manual (Page 166)

165
System settings
System settings
Setting the display design
̈ Select “System” K “System Settings”
K “Display”.
̈ Select “Day Mode” or “Night Mode” or
“Automatic”.
The dot Rin front of the list entry indi-
cates the current selection.
i
In the “Automatic” setting, COMAND evalu-
ates the automatic vehicle light sensor and auto-
matically switches over the display design.
Setting the time
i
The correct time is essential for the follow-
ing system functions to operate correctly:
ț Route guidance on routes with time-depen-
dent traffic routing
ț Calculation of estimated time of arrival
ț Time stamps for calls received and calls di-
aled
̈ Select “System” K “System Settings”
K “Time” K “Set Time”.
1 Sets the time
2 Current date
̈ To set value: Rotate y m z or slide
q m r .
̈ To save setting: Press n.
i
The increment for setting the minutes de-
pends on the situation. It is 30 minutes if the ve-
hicle is equipped with a navigation system and if
GPS signals are being received. It is one minute
if GPS reception is not available.
i
If you change the time in 30 minute steps,
previously selected settings for time zone and
switching between summer time and standard
time are lost (
୴ page 166).
Setting time/date format
̈ Select “System” K “System Settings”
K “Time” K “Format”.
The format list appears. The dots Rin
front of the list entries indicate the cur-
rent setting.
i
The abbreviations mean:
Date format: DD - Day, MM - Month,
YY/YYYY - Year
Time format: HH - Hour, MM - Minute for
24-hour and AM/PM format
̈ To change format setting: Rotate
y m z or slide q m r .
̈ To confirm selection: Press n.
̈ To save setting and quit menu:
Slide
o m p .
Time settings