Rice Lake 880 Performance Series Panel Mount Indicator/Controller - EtherNet/IP Interface Option Installation and Programming Manual - Manual (Page 13)

Configuring the Network Settings 9
3.0 Configuring the Network Settings
Configuring the network setting can be done using a web browser or the Anybus IP
configuration utility.
Open a browser and just type the IP address of the card. Default xxx.xxx.xxx.xxx.
Change any or all the setting and then click on the Store configuration button.
Figure 3-1. EtherNet/IP Configuration Screen Using your Web Browser
To set the network settings using the Anybus IP Configuration program.
1. Open the Configuration program found on the CD.