0 ethernet/ip interface specifications, Ethernet/ip interface specifications – Rice Lake 880 Performance Series Panel Mount Indicator/Controller - EtherNet/IP Interface Option Installation and Programming Manual User Manual
Page 28
Advertising
24 Modbus Interface Installation and Programming Manual
5.0
EtherNet/IP Interface Specifications
Power Requirements
Bus Adapter Card with EtherNet/IP Module, DC Power:
Supply voltage
6 VDC
Typical current draw
270 mA
Power consumption
1.62 W
Maximum Current Draw
500 mA
Maximum Power
3 W
Communications Specifications
EtherNet/IP Network Communications:
Twisted-pair cabling at 10 or 100Mbps
Environmental Specifications
Temperature:
–10° to +40° C (14° to 104° F)
Conformance
The EtherNet/IP Interface has been tested by ODVA’s independent test lab and found to
comply with the ODVA composite conformance test, revision 3.
The EtherNet/IP Interface has been found in accordance with EMC directive 89/336/EEC
for European standards EN 50081-2 and EN 61000-6-2.
Advertising