Rice Lake 880 Performance Series Panel Mount Indicator/Controller - EtherNet/IP Interface Option Installation and Programming Manual - Manual (Page 14)

10 EtherNet/IP Installation and Programming Manual
2. Click on the Scan button if the device does not appear in the window.
3. Once the device is found double click on the device found in the window.
4. A window will be displayed with the current network settings.
5. Change any or all setting and click on the Set button.
3.1 Configuring a Generic Ethernet Module in a
CompactLogix or ControlLogix PLC.
Figure 3-2. Generic EtherNet Module Screen