Rice Lake 920i Installation Manual V4.0 - Manual (Page 48)

42 920i Installation Manual
CONTACT —
Allows specification of contact information for use in iQUBE 2
alert messages. See Level 3
submenu descriptions in Table 3-8 on page 43.
LOCALE OFF
ON Locale. Set this parameter ON to enable the LATUDE and ELEVAT parameters. Specifying
latitude and elevation of the scale site provides compensation for gravitational effects.
Attached scales must be recalibrated after changing this parameter from OFF to ON.
NOTE: Gravitational compensation settings do not affect iQUBE 2
scales.
LATUDE 45
0–90 Latitude. Specify the latitude of the scale site in degrees. This parameter is shown only if
LOCALE=ON.
ELEVAT 345
±0–9999 Elevation. Specify the elevation of the scale site in meters. Valid values are –9999 through
9999. This parameter is shown only if LOCALE=ON.
IMAGE NEGATIVE
POSITIVE Specifies whether the indicator display is presented as blue-on-white or white-on-blue.
The default value, NEGATIVE, shows the standard blue-on-white image when using the
stock LCD display; the optional outdoor display shows white-on-blue. When using the
outdoor display, set this value to POSITIVE to show the standard, blue-on-white display
image, then use the LCD contrast potentiometer to adjust for optimal viewing.
LANGUAGE ENGLISH
language Specifies the language and character set used for 920i prompts and printing.
Level 3 submenus
DATEFMT MMDDYYYY
DDMMYYYY
YYYYMMDD
YYYYDDMM Specifies the format used to display or print the date.
DATESEP SLASH
DASH
SEMI Specifies the date separator character.
TIMEFMT 12HOUR
24HOUR Specifies the format used to display or print the time.
TIMESEP COLON
COMMA Specifies the time separator character.
FEATURE Menu
Parameter Choices Description
Table 3-7. FEATURE Menu Parameters (Continued)