2 default print formats – Rice Lake 920i Installation Manual V4.0 User Manual
Page 67
Print Formatting
61
6.2
Default Print Formats
Table 6-2 shows the default print formats for the
920i
and lists the conditions under which each print format is
used. The HDRFMT1 and HDRFMT2 formats are used to specify header information that can be used by the
other ticket formats. The contents of the HDRFMT
x
format can be inserted into any other ticket format using the
<H1> and <H2> formatting commands.
Table 6-2. Default Print Formats
Format
Default Format String
Used When
GFMT
GROSS<G><NL2><TD><NL>
Normal mode, no tare in system
NFMT
GROSS<G><NL>TARE<SP><T><NL>NET<SP2><N>
<NL2><TD><NL>
Normal mode, tare in system
ACCFMT
ACCUM<A><NL><DA><TI><NL>
Accumulator enabled and displayed, or
setpoint print operation with PSHACCM=ON
SPFMT
<SCV><SP><SPM><NL>
Setpoint print operation with PSHPRNT=ON
TRWIN
<NL>ID<SP><TID><NL2>GROSS<TR1>
<NL2><DA><SP><TI><NL>
Press the Weigh In softkey, enter truck ID
number, and press enter.
TRWOUT
<NL6>ID<SP><TID><NL2>GROSS<TR1><NL>TARE<SP>
<TR2><NL>NET<SP2><TR3><NL2><DA><SP><TI><NL>
Press the Weigh Out softkey, enter truck ID
number, and press enter.
TRFMT
REG ID: <TID>: <TR2> SCALE<S> <TD><NL>
Truck register currently displayed
ALERT
<COMP><NL><COAR1><NL><COAR2><NL><COAR3><NL>
<CONM1><NL><COPH1><NL>
<CONM2><NL><COPH2><NL>
<CONM3><NL><COPH3><NL>
<COML><NL><ERR><NL>
Alert message is sent to specified port when
error indication is generated by an attached
iQUBE
2
. See the
iQUBE
2
Installation Manual,
PN 106113, for more information.
HDRFMT1
HDRFMT2
COMPANY NAME<NL>STREET ADDRESS<NL>
CITY, ST ZIP<NL2>
Must be inserted into other print format
AUXFMTxx
GROSS<G><NL2><TD><NL>
Formats AUX1FMT—AUX20FMT
AUDITFMT
Fixed format; cannot be edited
Press PRINT when audit trail is displayed, or in
response to a DUMPAUDIT serial command.
NOTES:
• In OIML and CANADA modes, the letters PT (preset tare) are automatically inserted after the printed tare weight.
• When using Version 3 of
iRev 4
with older indicator software, the single auxiliary format (AUXFMT) is handled as AUXFMT1.
Alert Format Commands
<COMP>
Company name (up to 30 characters)
All
<COAR1>
<COAR2>
<COAR3>
Contact company address, lines 1–3 (up to 30 characters)
<CONM1>
<CONM2>
<CONM3>
Contact names (up to 20 characters)
<COPH1>
<COPH2>
<COPH3>
Contact phone numbers (up to 20 characters)
<COML>
Contact e-mail address (up to 30 characters)
<ERR>
Alert error message (system-generated)
ALERT
See the
iQUBE
2
Installation Manual, PN 106113, for more information about using alerts.
Command
Description
Supported Ticket Formats
Table 6-1. Print Format Commands (Continued)