Rice Lake 920i Installation Manual V4.0 - Manual (Page 57)

Configuration 51
3.2.9 VERS Menu
The VERS menu can be used to check the installed software version or, by using the Reset Config softkey, to
restore all configuration parameters to their factory default values. There are no parameters associated with the
Version menu: when selected, the indicator displays the installed software version number.
SCALES SERIAL FEATURE PFORMT SETPTS DIG I/O VERS
Software
version
Figure 3-19. Version Menu
The Contacts softkey on the Version menu allows display of contact information (see “FEATURE Menu,
CONTACT Submenu” on page 43). If an iQUBE 2 scale is configured, a Diagnostics softkey also provides access
to iQUBE 2 diagnostic information.