Rice Lake BCi Belt Scale - Installation & Operation Manual Version 2.00 - Manual (Page 11)

BCi Installation & Operation Manual - Introduction and Overview 5
Belt Travel Speed Wheel - Optional
The belt travel speed wheel is located near the weigh frame. Positive contact must be maintained between the roll
and the belt for proper operation. The speed sensor should never come in contact with material that is being
conveyed along the belt nor the belt itself. The signal generated by the speed wheel is converted by the integrator
into a value that represents belt travel distance. Various devices used for sensing belt travel include AC and DC
generators, mechanical belt or chain drives, photo-optical segmented disks, and electromagnetic pulse
generators. Installation procedures for the speed wheel are explained in detail on page 24. The graphic below
illustrates the major component parts of the speed wheel.
Figure 1-4. Speed Wheel
Magnetic Shaft Encoder - Optional
Another option besides the belt travel speed wheel is a magnetic shaft encoder which can also be used to
determine belt travel distance like the speed wheel. The magnetic shaft encoder should never come in contact
with material that is being conveyed along the belt nor the belt itself. The signal generated by the encoder is
converted by the integrator into a value that represents belt travel distance.
Figure 1-5. Magnetic Shaft Encoder
RLWS Part Number Description (Qty)
94969 Complete Speed Wheel Assembly (1)
96543 Speed Wheel (1) (wheel only)
94979 Speed Proximity Sensor (1)
94970 Speed Wheel Bracket Assembly (1) (wheel not included)
Cabling to integrator (1)
94980 U-Bolts (2)
21161 Splice Box (1)
98501 Expansion Cable - 20’
100038 Magnetic Shaft Encoder
Table 1-2. Speed Wheel Assembly Component Part Numbers