Rice Lake GF Series, A&D Weighing - Manual (Page 18)

16
Unit setting example
The example below sets the units in the order with g (gram) as the first unit followed by pc
(counting mode).
1 Press and hold the SAMPLE key until ba5fnc of
the function table is displayed, then release the key.
2 Press the SAMPLE key several times to display
1 Unit .
3 Press the PRINT key to enter the unit selection mode.
4 Press the RE-ZERO key to specify the unit of g
The stabilization indicator appears when the
unit is specified.
5 Press the SAMPLE key to display
1 Unit pC .
6 Press the RE-ZERO key to specify the unit of pc
The stabilization indicator appears when the
unit is specified.
7 Press the PRINT key to store the units.
The balance displays end and then displays the
next menu item of the function table.
8 Press the CAL key to exit the function table. Then the
balance returns to the weighing mode with g, the unit
selected first.
9 Press the MODE key to switch between g and pc
(g →pc).
Press
several times
Specify
Select
Store
Specify
Press and hold