Rice Lake Portable Bariatric Wheelchair Scale Single Ramp (350-5) - Rice Lake Bariatric Wheelchair Scale User Manual
Page 29
Bariatric Wheelchair Technical and Operating Manual - Troubleshooting and Testing
25
NOTE:
<-> means the display toggles between the two values.
Table 8-2. Test Mode Menu
Step
Function
Display
Available Parameters
1
Turn the scale on.
While StArt is
displayed, press and
hold the REWEIGH
key.
This enters into
the test mode of
the scale.
StArt
The scale automatically advances to Step
2.
2
Identifies the
software ID
IdEnt <-> 11007
Press the REWEIGH key to advance to
the next step.
3
Shows the current
weight value
tESt <-> 0.0
To zero the display, press the Kg-Lb key.
To advance to the next step, press the
REWEIGH key.
4
Shows the current
A/D count
A-d <-> XXXX
To advance to the next step, press the
REWEIGH key.
5
Checks for current
battery level
bAt <-> XXX or nO bAt
If the nO bAt is displayed, there are not
batteries in the unit, or the unit is
operating on its external AC adaptor.
To advance to the next step, press the
REWEIGH key.
6
This shows the
calibration factor.
FACtOr <-> XXXXX
Press the REWEIGH key to return to the
top of the test menu.
To exit test mode, press the REWEIGH
and Kg-Lb key simultaneously, or turn off
the indicator.