4 scale feet adjustment – Rice Lake Portable Bariatric Wheelchair Scale Single Ramp (350-5) - Rice Lake Bariatric Wheelchair Scale User Manual
Page 7
Advertising
Bariatric Wheelchair Technical and Operating Manual - Scale Setup
3
4. Stand the scale on its side so that the plastic packaging material can be removed.
Figure 2-2. Remove Plastic Wrapping off of Scale
2.4
Scale Feet Adjustment
The scale feet are shipped attached to the scale. Adjustments need to be made in order for the scale to sit properly
on the floor.
1. There must be adequate clearance between the scale base and the floor so screw each foot out counter
clockwise two full turns. This will ensure that there is enough clearance between the scale base and the
floor.
Figure 2-3. Backing Out the Scale Feet
2. Carefully unwrap the load cell cable located on the underside of the scale. It will run out the underside of
Advertising
This manual is related to the following products: