Rice Lake SURVIVOR 420HE Hostile Environment - Installation Manual - Manual (Page 23)

420HE Installation Manual - Configuration 19
3.2.3 Calibration Menu
See Section 4.0 on page 27 for Calibration procedures.
XXXXXXX XXXXXXX XXXXXXX XXXXXXX
WZERO WV AL WSPAN
ALGOUT DIGI N SETPNT PROGRM PFORMT SERIAL CALIBR CONFIG FORMAT
REZERO
VERS
Figure 3-7. Calibration Menu
Table 3-4. Calibration Menu Parameters
CALIBR Menu
Parameter Choices Description
Level 2 submenus
WZERO — Display and edit the zero calibration A/D count value.
DO NOT adjust this value after WSPAN has been set!
WVAL — Display and edit the test weight value.
WSPAN — Display and edit the span calibration A/D count value.
REZERO — Press Enter to remove an offset value from the zero and span calibrations.
Use this parameter only after WZERO and WSPAN have been set. See Section 4.1 on
page 27 for more information about using this parameter.
3.2.4 Serial Menu
See Section 7.3 on page 40 for information about the 420HE serial data format.
XXXXXXX XXXXXXX XXXXXXX XXXXXXX
EOLDLY
000000
number
EDP PRINT
PRN
EDP
PRNDES
BITS TERMIN BAUD
CR
9600
7ODD
7EVEN
8NONE CR/LF
4800
2400
1200
600
300
Same as EDP
EDP
OFF
STREAM
PRN
ALGOUT DIGIN SETPNT PROGRM PFORMT SERIAL CALIBR CONFIG FORMAT
ECHO
ON
OFF
VERS
19200
38400
2 STOP
1 STOP
S BITS
BOTH
BOTH
LFT
INDUST
STRRTE
ON
OFF
PRNMSG
Figure 3-8. Serial Menu