Rice Lake SURVIVOR 420HE Hostile Environment - Installation Manual - Manual (Page 36)

32 420HE Installation Manual
CONSTUP Consecutive number start-up value 0–999 999
DATEFMT Date format MMDDYY, DDMMYY, YYMMDD, YYDDMM
DATESEP Date seperator SLASH, DASH, SEMI
TIMEFMT Time format 12HOUR, 24HOUR
TIMESEP Time seperator COLON, COMMA
Table 5-8. PFORMT EDP Commands
Command Description Values
GFMT Gross demand print format
string See Section 6.0 on page 35 for detailed information
NFMT Net demand print format string
Table 5-9. SETPNTS EDP Commands
Command Description Values
SP1 SP2
SP1.ENABLE SP2.ENABLE Setpoint enable OFF, ON
SP1.KIND SP2.KIND Setpoint kind GROSS, NET
SP1.VALUE SP2.VALUE Setpoint value number
SP1.TRIP SP2.TRIP Trip Higher, Lower, Inband, Outbnd
SP1.BNDVAL SP2.BNDVAL Band value number
SP1.HYSTER SP2.HYSTER Hysteresis number
SP1.ACCESS SP2.ACCESS Setpoint access OFF, ON
Table 5-10. DIG IN EDP Commands
Command Description Values
DIGIN1
DIGIN2 Digital input function OFF, ZERO, TARE, NT/GRS, UNITS, DSPTAR, PRINT, CLRCN,
KBDLOC, HOLD, CLRTAR, CLRACC, ACCUM, NEWID
Table 5-11. ALGOUT EDP Commands
Command Description Values
SOURCE Analog output source GROSS, NET
OFFSET Zero offset 0%, 20%
ERRACT Error action FULLSC, HOLD, ZEROSC
MIN Minimum value tracked 0–999 999
MINNEG Minimum negative OFF, ON
MAX Maximum value tracked 0–999 999
MAXNEG Maximum negative OFF, ON
TWZERO Zero calibration 0–16 383
TWSPAN Span calibration 0–16 383
Command Description Values
Table 5-7. PROGRM EDP Commands