Rice Lake TC Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 12)

RL-TC Series Operation Manual 7
3. Basic Operations
3.1 Installation
1 Positioning the measurement pan First, mount the pan base on the
main unit of the balance and place
the measurement pan on top of it.
Be sure to mount the pan base in the
correct direction, as illustrated below.
2 Securing the exact level of the balance Turn the adjusters (feet) until the
bubble rests in the center of the red
circle on the level.
Round-pan type: total of two
adjusters, one on
either side at front
Square-pan type: total of four
adjusters, one on
either side at front
and rear
<Caution>
Use caution when operating the
adjusters on the square-pan type to
prevent them from lifting up.
3 Connecting the AC adapter Connect the AC adapter to the
balance, as illustrated at left.