Rice Lake TC Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 7)

2 RL-TC Series Operation Manual
 Do not place the balance on an unstable base
or use the balance in a location where it may
be subjected to shock.
• The loaded sample may fall off the
measurement pan.
•
Accurate measurement may be rendered
impossible.
 Do not lay the AC adapter cable in the path of
traffic.
• Somebody may trip on the cable, causing the
balance to fall off, thereby causing injury and/or
damage to the balance.
 Do not touch the AC adapter or balance with
wet hands.
• Danger of electric shock
 Do not use the balance in a location were it
may be subjected to excess moisture.
• Electric shock or short-circuiting could occur.
•
The balance may be corroded, with resultant
malfunction.
 Do not use the balance with its adjusters (feet)
lifted.
•
The balance will become unstable,
preventing accurate measurement.
 Do not use the balance in a location where it
may be subjected to excess dust.
• Risk of explosion or fire
•
Short-circuit or lack of continuity may occur,
leading to a malfunction of the balance.
RECOMMENDED
Calibrate
Balance
 Calibrate the balance after installation or
relocation.
• Measurement values may contain errors,
preventing accurate measurement from being
conducted.