2 operation check, Operation check – Rice Lake TC Series, Rice Lake Weighing Systems - Operation Manual User Manual
Page 13
8 RL-TC Series Operation Manual
3.2
Operation Check
1
Turning on the power
When the balance has the AC
adapter connected, it displays [*].
Pressing the On/Off key
The display section lights up, and the
balance is ready for operation.
2
Checking the display
Check to see if the display has any
missing indications or unlit parts.
A few seconds after startup, the
indication is reset to zero.
3
Switching the measurement mode
Press the Function key.
Each time the key is pressed, the unit
of measurement changes, as
indicated.
※The balance is shipped from the
factory with the following switching
sequence: [g]
→ [ct] → [Pcs] → [%]
→ [g] → · · ·
4
Verifying changes in the read-out indicator
Press the measurement pan lightly
and make sure that the read-out
indicator changes.
Also, ensure that the read-out
indicator is reset to zero when you
release your hand.
0
0
F
Pcs
#
g
%
HI
OK
LO