Rice Lake TC Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 28)

RL-TC Series Operation Manual 23
8.1 Limit Function Setup (cont.)
2 Selecting a function item Press the Function key.
The display changes to the next item
[Limit Function].
3 Setting the limit function Press the Zero/Tare key to set the
value on the rightmost side to [1].
4 Setting the judgement condition Press the Function key.
The display changes to [Judgement
Condition].
Press the Zero/Tare key to select the
desired condition.
5 Setting the judgement range Press the Function key.
The display changes to [Judgement
Range].
Press the Zero/Tare key to select the
desired choice.
6 Setting the number of judgement points Press the Function key.
The display changes to [Judgement
Points].
Press the Zero/Tare key to select the
desired choice.
7 Terminating the function setup Press the Target key.
The balance terminates the function
setup and returns you to measurement
mode.