Rice Lake TC Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 25)

20 RL-TC Series Operation Manual
7. Measuring Percentage
The percentage measurement function operates by weighing an actual sample, selected as the reference, and saving
its weight as the reference value and indexing it as 100%. When a measurement sample loaded on the balance is
lighter or heavier than the reference, its weight is indicated as a percentage (%) value relative to the reference weight.
1 Activating the percentage mode Press the Function key to disaplay [%].
2 Setting the reference value Press the Target key.
The display begins flashing
[
P.SEt
]. The balance is now ready for
reference value setup.
3 Loading the sample Load the reference sample.
4 Saving the reference value Press the Memory key.
The balance indexes the weight value of
the reference sample as 100% and
returns you to measurement mode.
5 Loading a sample to be measured The balance now indicates the weight of
the loaded sample as a percentage (%)
value relative to the reference value.