Rice Lake TC Series, Rice Lake Weighing Systems - Operation Manual - Manual (Page 22)

RL-TC Series Operation Manual 17
4 Changing the sampling number, if necessary. If samples to be counted widely deviate
in weight, or a higher measure of
accuracy is desired, it is recommended
that users change the sampling number
to a larger value.
Press the Zero/Tare key.
Each press of the key changes the value on
the right end. Select the desired value.
If the sampling number need not be
changed, go on to the next step.
5 Loading samples Load the number of samples displayed.
Count the samples precisely and load
them in the center of the measurement
pan.
6 Saving the unit weight of samples Press the Memory key.
The balance saves the unit weight and
reverts to measurement mode.