Torbal AGS100 250C PRO Manual - Manual (Page 38)

38
19.1. Autotaring
1. Enter the main menu by pressing the MENU key.
2. Use the navigation keys to select “Autotaring” and press ENTER.
3. To deactivate or activate the Autotaring function, select option (1) and press the ENTER key.
4. To change the auto zeroing range, use the navigation keys to select option (2) Correction Range
and press the ENTER key.
5. Using the numeric keys to enter the desired Autotaring range between 0.5d and 5.0d.
6. Once the new range has been entered, press the ENTER key to save the setting.
Chapter 19: Main Menu